Covering Your Tattoo Machine And Grip/tube
Your tattoo machine should always be covered in plastic when you are working with it to avoid being contaminated by blood and liquids. You can do this very easily by using a classical machine bag for coil and angled rotary machines. For pen-style machines, it is best to use a fitting clip cord sleeve that you can put over the machine. Dont forget to also cover your grip when you are not using disposable grips. Take care to seal the plastic bag with either a rubber band or cohesive bandage. Needless to say, these items should be kept in a drawer and not lay openly around your working place to keep them from being contaminated by splashing liquids.
This way you can prevent contamination on your machine to a good grade in the first place and the cleaning effort is not as much. Disposable grips and disposable tubes are a great choice if you want to work clean or if you do not have the time and equipment at hand to clean and sterilise your machine and grip/tube after the session.
When you cover your tattoo machine and have it sealed inside the plastic bag, as well as taking care that it does not come into contact with any liquids, blood or any other working equipment , you do not need to sterilise your machine for the next customer. Nonetheless, you need to clean and disinfect your tattoo equipment, even though it has been sealed in a plastic bag.
We still recommend sterilising your machine after each use to eliminate the risk of cross-contamination.
Tattoo Preparation: The Safe Way
Tattoo cleaning supplies, sterilization and sanitation have come a long way since the dark dingy shops of yesteryear. Today we have sophisticated autoclave methods to sanitize reusable equipment. Disposable tools like disposable tattoo tubes and needles are becoming very popular and are effective in the prevention of contamination. Barrier methods like clip cord covers, machine covers and the barrier film are a great way to keep tools clean. A clean tattoo is a good one and before you know how to ink someone, you should already know proper sanitization methods for your equipment. For those that do not want to invest in a proper autoclave, we suggest going the disposable route. Going disposable is cheap, effective and fast.
Hfs Tattoo Sterilizer Machine Best Pick
Here, we review sterilizer machine that manages to win our hearts. Its the Hfs Tattoo Sterilizer Machine and its widely considered as one of all-around great sterilizer machine you can buy. Also, it includes quartzite 4 additionally has an aluminum inner pot 3. 4.6 cm in diameter x 6.5 cm deep. Most importantly, the hfs tattoo sterilizer machine is used to open the lid, pour quartzite into the pot.
Most customers quickly discovered that the sterilizer machine works very fast in 3min is already warm. Moreover, they strongly agree that the sterilizer machine fits tweezers and waxing implements. Moreover, a few strongly agree that this sterilizer is convenient and just the right size. Therefore, buyers were very happy to recommend it to friends and would-be buyers.
Recommended Reading: How Much Does A Back Tattoo Cost
Giodlce Spa Equipment Uv Sterilizer Best Runner Up
Best Runner Up
Giodlce Spa Equipment Uv Sterilizer is the epitome of what a great uv sterilizer should be. The giodlce spa equipment uv sterilizer is designed to fit any room decorations. Abs shell & stainless steel inner. Also, it has a built-in uv bulb for safe, effective and efficient sanitization. Above all, the giodlce spa equipmentuv sterilizer is ideal for home, hotel, spa, salon, gym, etc.
To sum up, for most customers, it was what they were looking for.
Uv Disinfection Sterilizer Tattoo Machines
Medical salon beauty Disinfection Sanitizer Cabinet UV Tools Sterilizer
Features:
Environmental ABS material sterilizer is clean, healthy and safe.
Flip-type lid is designed for disinfecting and sterilizing, furthermore, it can prevent the ultraviolet radiation from shining out so that can guarantee the full use of inner UV sterilization.
Built-in UV lamp, electric machine for quick and effective sterilizing many tools and kill most micro-organisms, leaving you an extremely clean and safe surroundings.
Comes with a plate that can be detached, which is convenient and easy to use.
Very practical and functional, can widely used for disinfecting clothing, towels, napkins, tablecloths, blankets, small appliances easily at any time.
Ideal for beauty salon, sauna shop, SPA, hotel, nail salon, hair salon, etc.
Brand Name : FacesHowes
Name : Medical beauty Disinfection Sanitizer Cabinet UV Tools Sterilizer
Usage : Nail Salon
Read Also: Good Tattoo Shops In Austin
Sterilisation Alternatives To Autoclaving
Autoclaving is by far the best form of sterilisation in the tattoo and piercing industry.
Flame sterilisation for needles and other piercing tools is one of the most unacceptable sterilisation methods as it can easily lead to contamination.
Whats more, this method damages the structural integrity of such equipment.Boiling water is not recommended as a means of sterilisation as well. This is because it is not effective at killing some bacteria, even at 100oC.
Other methods, such as rubbing alcohol, are effective at disinfecting piercing equipment but may not kill microbes that cause diseases such as Hepatitis. Sterilisation using chemicals such as ethylene oxide gas, formaldehyde, glutaraldehyde is yet another option.
Some of the practitioners in this industry also use ionising and ultraviolet radiation for sterilising equipment, but ultraviolet doesnt guarantee effective results compared to autoclaving. What benefits does sterilisation and autoclaving provide to players in the tattoo and piercing industry? Here are some of them:
- Prevent infections on individuals getting tattoos and piercings
- Prevention of potentially terminal diseases
- Longer lifespan of equipment
Autoclaves And Piercing Equipment
Not all equipment used in tattoo and piercing studios can be sterilised using an autoclave.
Some of these, such as piercing guns, are made of plastic, which would melt when placed in an autoclave.
Most of the parlours that still use the old metal piercing guns dont sterilise them properly and may, therefore, be unfit for piercing.
Equipment made of metals, glass, and some acrylic can be sterilised using autoclaves.
Some of the acrylics that can be autoclaved include Bioplast, PMMA, PTFE, and Bioflex.
Also Check: Take It Off Tattoo Removal Louisville
Alekshop Tattoo Sterilizer Machine Best Premium
Best Premium
Not everyone likes to purchase sterilizer machine for their regular usage, but the AlekShop Tattoo Sterilizer Machine would be an anomoly. Built-in uv sterilizer to keep towels germ-free. In addition, the sterilizer machine is made of abs plastic and stainless steel. The sterilizermachine is easy to maintain and gels well with your regular usage.
How To Clean And Sterilise Your Tattoo Machine
Give it a share!
Your tattoo machine is probably the most important tool you need for tattooing. Whether you are using rotary or coil machines, it is important that you pay special attention to cleaning and sterilising your machine. Your tattoo machine comes in close contact with the customer and, unlike needles and cartridges, is used repeatedly on different customers.
To avoid any cross-contamination between your customers, and keeping germs and bacteria from spreading, you must not only wrap and cover your tattoo machine to create a physical barrier but also clean and disinfect your tattoo machine after each session and customer. In this article, we will show you how to clean, disinfect and sterilise your tattoo machine and which products you need to do so.
You May Like: American Tattoo Society Of Jacksonville
Prevention Of Potentially Terminal Illnesses
Infectious diseases such as AIDS and Hepatitis C are some of the worst infections that could occur during tattooing or piercing.
Such illnesses are terminal, as they affect the immune system and body parts such as the liver, which could lead to death in the long run.
As such, such infections should be avoided at all costs, which means autoclaving all equipment used for tattooing and piercing.
How Does A Uv Sanitizing Wand Work
First and foremost, follow the instructions that came with the wand because they are all a bit different. If you somehow obtained a wand with no instructions here is what you need to know.
Keep it straight. These wands work best in a flat, horizontal, and downward position. Many have safety features that shut off the lamp if it’s turned upright to protect your eyes. If you need to use it on something like a wall or mirror, it can be used vertically, just be sure to keep it aimed directly at the surface so you don’t trigger the safety shut off.
Do not shine it on people, animals, or near anyone’s eyes. It won’t kill you like it will bacteria but your eyes can be severely damaged according to this article from Prevent Blindness.
These wands are most effective on flat smooth surfaces, so they are mainly meant for counter surfaces, manicure tools, and other smooth objects. These wands can kill over 90 percent of all microbes.
It takes at least 10 seconds to be effective. Think of it like ironing–if you pass it over at lightning speed, it won’t work. Go slow, work in sections.
Between a half-inch and an inch is the sweet spot for how high off the surface you want to hold your wand. Any closer and it’s going to take you a lot longer to cover the area and any higher and the effectiveness goes down.
UV wands can also be handy to travel with, as you can use them to ensure your hotel linens are clean and sterile.
Also Check: Skin Graphics Tattoos & Body Piercing
Uv Sterilizer Nails Vet
- 360-degree disinfection / double sterilization / ozone UV disinfection / American-style drawer cabinet
- Put the tools to be sterilized into the sterilization box, close the cover of the sterilization box, and adjust the tool box to a suitable position
- Turn on the power. When the light turns purple, disinfection starts. The disinfection time is 30-40 minutes.
- After the disinfection is completed, turn off the power and open the lid of the disinfection box to remove the tool.
- If you want to remove the tool during the disinfection process, you must first cut off the power and then open the cover to remove the tool
Soaps & Miscellaneous Supplies
Soap is the first thing you will touch in the tattoo process and the last. Because of its importance, you’ll want to ensure you are using quality soap on yourself and your client. Additionally, there are supplies used occasionally during the sanitation process that aren’t used directly in tattooing. These supplies are vital to disease control and sterilization, and you’ll need to ensure you have them to provide a sterile environment.
Recommended Reading: Eyebrow Tattoo In My Area
Uv Lamp Sterilizer Ultratron
Alvi Prague UV lamp sterilizer UltraTron-220W is an up-to-date healthcare device. UV sterilization provides a sanitary workspace and is an incredibly powerful disinfectant in killing infectious bacteria, viruses, and fungi.
The use of UV sterilization, or ultraviolet germicidal irradiation, has been found to be extremely effective. Sources of UV sterilization can kill over 99% of viruses, bacteria, and fungi in an extremely short amount of time.
Superior quality
The lamp tube is made of high-purity quartz glass. It is not easy to be exposed to ultraviolet light and is more durable. The shell is made of ABS flame retardant material, which is not easy to leak, has good heat dissipation and has a service life of up to 9,000 hours.
Features:
- Efficient ultraviolet germicidal light with the 254 nm wavelength 185 nm for ozon generation
- Superior quality
- Easy to move
- Wide application
The UV lamp sterilizer UltraTron-220W of our production is intended for professional use. To simplify its operation the intelligent control system is used, with which you can:
- timing control panel
- turn on the equipment at a specified time
- in automatic mode, instantly interrupt processing when a person or animals appears in the room
- automatically turn off the light after disinfection is completed.
- Bactericidal lamps of the sterilizer are designed for 9000 hours of daily work! At the end of this period they must be disposed of and replaced.
| Type |
Prevent Infections When Tattooing And Piercing
Tattooing involves making incisions and inking the skin.
Whenever this process is done using non-sterile equipment, there might be a risk of infection as bacteria and viruses may be introduced to the wound.
Microorganisms such as impetigo and viral warts may cause serious infections that may be detrimental to an individuals health.
As such, using sterilised equipment ensures that the tattoo and piercing wounds are free from any bacteria and viruses that may bring about infection.
Recommended Reading: Laser Tattoo Removal Before And After 1 Session
Cleaning Your Tattoo Machine
After and before a tattoo session you should mechanically clean your machine with a disinfectant and paper tissues. To do this, disassemble your tattoo machine and lay all parts in front of you. Put on a new pair of medical gloves and start with the first piece.
Wipe all parts of your machine thoroughly. Do not forget to clean the accessible inside parts of your machine and tattoo machine grip . This can be a bit tricky and you might need to use a cotton tipped applicator to get to every last cranny of the machine.
Now your tattoo machine should look clean and shiny like when you first bought it, without any stains or visible dirt.
Keep in mind that your tattoo machine is now mechanically clean, but it is not sterile and therefore not yet ready to be used with your next customer.
How To Sterilise A Tattoo Machine Without An Autoclave
If you do not have an autoclave, you can also use an ultrasonic cleaner as an alternative. The ultrasonic cleaner uses high frequencies in combination with a chemical cleaning solution to eliminate any contamination on your equipment.
While the ultrasonic cleaner does a great job at cleaning your equipment, it will not sterilise your equipment!
Another method of cold sterilisation is chemical baths. These take much longer to be effective but are a good method of getting your equipment usable for the next customer. Perhaps overnight.
Unfortunately, these methods are not as efficient and safe as an autoclave. If you do not have an autoclave, you should pay extra-high attention to properly disinfecting your equipment and sealing your tattoo machine in a plastic bag. Also, you should consider using disposable grips and disposable tubes as they come pre-sterilised and lower the risk of cross-contamination for your customers.
You May Like: Pfd Patch Tattoo Removal Cost
How Do Uv Sterilizers Work
Using UV-C light to clean sounds futuristic but it has been used to sanitize surfaces since 1878. The 1903 Nobel Prize in Physiology was awarded for the use of UV light to kill and prevent tuberculosis. It’s currently used in medical, food preparation, and water sanitation services, but now the technology has shrunk enough that you can have your own UV sanitizer at home. These handy devices are used to clean everyday objects like phones, wallets, and bags .
So how do UV sterilizers work? In order to understand that, we should first talk about what UV light is. We’re exposed to ultraviolet light from the sun all the time. Our sunblock protects us from UV-A and UV-B light which can cause sunburns and skin cancer. UV-C light, the kind created by these sterilizer devices, is generally deflected by our ozone layer and never reaches us. UV-C bulbs are not the same as those black light bulbs you find everywhere around Halloween. These are powerful bulbs.
When UV-C light hits microbes, the light disrupts the bonds that hold their DNA together. Without working DNA, bacteria and viruses can’t replicate themselves or even perform normal cell functions and say the colony dies off. Which is pretty brutal if you think about it, but also awesome because a light bulb can kill all the bacteria on your bathroom counter.
For more information, this article from Scientific American really spells out things in detail.
Sterilisation And Safety Standards For Tattooing And Body Piercing
Reputable tattoo studios are most likely those that are compliant with the safety standards in this industry.
Before getting a tattoo, it is important to ask the following questions regarding a tattoo studio:
- Is the tattoo studio clean, including rooms such as the bathroom?
- What are the sterilisation procedures applied in the tattoo studio?
- Is an autoclave used for sterilising reusable equipment?
- How do they handle equipment that cannot be sterilised?
- Do they use sterile needles for piercing?
- Are piercing guns used for piercing procedures?
Recommended Reading: Best Lidocaine Cream For Tattoo
The Uv Steriliser For Cosmetic Devices
Cosmetic devices such as scissors, clippers, files and polishing attachments should be cleaned regularly, ideally with the PHY-6UVS-2 UV steriliser from physa, your experts for health and beauty. The steriliser ensures hygienic cleanliness even in hard-to-reach areas. Sterilising with the UV steriliser is much easier than with classic methods of cleaning cosmetic instruments which use heat or cleaning agents.
How To Clean Your Tattoo Machine
A clean machine is a safe machine, there are no two ways about it both for the client and for the artist. Furthermore a clean machine is also a reliable machine and the cleaning process is when you have a few moments to take a better look at you machine and see if there are any issues with it that need addressing like worn out bushings, cracked springs on a coil, exposed wires, cracked frames etc. You cant be worrying about these things when you are in the middle of a tattoo session with a customer.
Also Check: Fine Line Tattoo San Diego